Pump & Motor Switch Kit for MMB Mobile Mastercool RF030231
- SKU:
- RF030231
- Weight:
- 0.25 LBS
Description
Both switches for pump and motor for Mobile Mastercool MMB10-14. Backing plate not included.
These switches replace both the older black switches and the newer gray switches. The older black switches were wider but were the same height. The new switches will replace them but there will be a gap in the backing plate. New switches snap into a space that is 1" tall x 1/2" wide.
The wide black switches are no longer available. New switches will be black or tan, new pump switch will be green with a light to tell you the pump is running.
5 Reviews
-
New switches
New switches were slightly wider than original 1mm. But did work fine. The pump on off switch had 3 prongs where the original had 2 prongs. The third prong is for a light in the switch. I figured out the wiring for the switch but took a while would be nice if came with a wiring diagram. Other than that they work well and am happy with the replacement
-
Switch & service
Excellent, thank you for helping me DIY
-
Pump and motor switches
The switches popped right in to place and the product arrived quickly very satisfied
-
Switches for older cooler
Worked as advertised - appreciate the tip about the difference in width from the originals. Thanks for helping me keep my older swamp cooler chugging along.
-
Switch Kit
Had to modify the switch plate to fit in the new switches as they are a little wider then the originals, with that done they work GREAT.