Cooler Pads - Rigid Media Mastercool Style

Styrofoam spacer for Mastercool cooler pads. Use to take up space between pads and side of water tank. Usually 4 are needed to take up 1" on each side of the pad.

Styrofoam spacer for Mastercool cooler pads. Use to take up space between pads and side of water tank. Usually 4 are needed to take up 1" on each side of the pad.

Styrofoam spacer for Aerocool cooler pads. Works for Mastercool also. Use to take up space between pads and side of water tank. Usually 4 are needed to take up 1" on each side of the pad.

1/2" thick spacer to keep pads tightly installed in industrial wet section. Replaces Adobeair #RF070215

KPMV30 NEED 2 FOR WHOLE COOLER 11.5 T X 14.5 W X 8 D

Dial #3426 10" X 20-1/4" X 2" REPLACEMENT PADS FOR MMB10A MOBILE MASTERCOOL BY ADOBEAIR. CONTAINS TWO PADS TO REPLACE BOTH SIDES. RIGID EVAPORATIVE COOLER PAD. CARDBOARD PADS PROVIDE SUPERIOR EVAP...

15-1/4" X 24-5/8" X 3" REPLACEMENT PADS FOR MMB12A-D MOBILE MASTERCOOL BY ADOBEAIR AND MMPC12 MOBILE PATIO COOLER. RIGID EVAPORATIVE COOLER PAD. CONTAINS TWO PADS TO REPLACE BOTH SIDES. CARDBOARD...

Set of 3 Pads (2) 35.5 Tall x 5 Wide x 2.5 Deep (1) 35.5 Tall x 31.75 Wide x 2.5 Deep. (The larger pad will be in 2 pieces so the set is actually 4 pieces.) The plastic retaining pins and washers are...

17 5/8 tall X 33 7/8 wide X 8 deepReplaces Champion part # 310103 or 110103Fits the following Mastercool by Champion and Ultracool models: ADA35, ASA35

Dial Part #3436.  Replaces both sides of one cooler.  Order one set per cooler.RIGID EVAPORATIVE COOLER PAD. CARDBOARD PADS PROVIDE SUPERIOR EVAP COOLING BY PULLING AIR THROUGH CARDBOARD CHANNELS FOR...

This is the pad for the Champion MCP44 Mastercool. Also fits MCP44 MCP44E

20-1/8" X 28-3/8" X 3" REPLACEMENT PADS FOR MMB14A-D MOBILE MASTERCOOL BY ADOBEAIR. RIGID EVAPORATIVE COOLER PAD. CONTAINS TWO PADS TO REPLACE BOTH SIDES. CARDBOARD PADS PROVIDE SUPERIOR EVAP COOLING...