Electrical

Use with 115 Volt or 230 Volt Direct Line Voltage Control SwitchesOrder by the foot.  EX. Order Quantity 20 if you need 20 feet.

Can be used to replace Brisa, CoolTool, or Mobile Mastercool switches

115V Plug Box & Cord Changeover Upgrade your power management with the reliable and efficient 115V Plug Box & Cord Changeover. Designed for seamless transitions between power sources, this high-quality changeover box is perfect for commercial,...

Pigtail Pump Receptacle 115V/10AMP Plug With 10" LEADS - 18 Gauge Wire SPT Receptacle (P2-907) For standard 2 prong plus ground plug. All molded pump receptacle cords and pigtails will fit respective standard NEMA 115V prong configurations. Replaces...

Both switches for pump and motor for Mobile Mastercool MMB10-14. Backing plate not included.These switches replace both the older black switches and the newer gray switches. The older black switches were wider but were the same height. The new switches...

2-Speed (RSK-2) Wall Switch 6 Position White Plastic Plate (RATED FOR 1/3 - 3/4 HP MOTORS) Includes: Mounting screws and wiring diagram.

115 volt motor plug for most coolers. (NON-Mastercool) Two speeds and ground wire leads.

115V Swamp Cooler Electrical Plug Junction BoxFor most standard evaporative coolers other than Adobeair Mastercool. Non-Stock

115 volt motor plug, Mastercool (Adobeair) only. Two speed with ground leads. Replaces Mastercool Part #P215801A.

1 OR 2 Speed Pigtail Molded Motor Receptacle 115V-230V/15AMP - UP TO 1 HP 10" LEADS - 14 GAUGE/5 WIRES (P2-905) All molded pump receptacle cords and pigtails will fit respective standard NEMA 115V or 230V prong configurations. Motor plugs are...

Junction box with motor and pump receptacles for 120 volt.  Can be used with many different coolers.

Can be used to replace Brisa or Mobile Mastercool switches