5/8 X 22-1/2 Solid Shaft
- SKU:
- 6709
- UPC:
- 1668197285681
- Weight:
- 4.00 LBS
Description
The Blower Shaft is made of high-grade steel. Its quality is equal to that of your cooler's "original equipment." You can be confident in its trouble-free performance.
- 5/8 in. x 22.5 in.
- Manufactured with a "flat" to secure the blower pulley's set-screw
- Polished steel construction
- Chamfered ends
- Easy to install
Related Products
Motor Shaft Adapter 1/2 X 5/8
$4.99
Adapts to a 1/2" x 5/8" Motor Pulley Adapter Adapts 5/8" pulley to a standard 1/2" cooler motor shaft.
D2742
Solid Evaporative Cooler Shaft 26-5/8 x 1-3/16 PMI Commercial
$104.00
26-5/8" long x 1-3/16 diameter. For Phoenix MFG 8500 coolers.
PMI-5-3-117
38" X 1-3/16" Solid Blower Shaft PMI 5-3-6
$127.00
38" long x 1-3/16" diameter blower shaft. Slot for 1/4" key. PMI part #5-3-6. Is shorter but can replace Adobeair M315101A, M312503A.
PMI-5-3-6
PAD FRAME 22 X 26-5/8 PMI FD350 5-2-8A
$154.00
Pad frames for the Phoenix MFG models FD350 FS350 BD3000 BH3000 BW3500 BW3501 Slides up and into cooler without a latch.
PMI-5-2-8A
Hollow Shaft 1" X 19-1/2"
$40.00
Hollow shaft for 3000 cfm coolers with 1" shaft diameter.
PMI-5-3-1
22-1/2" X 41-1/4" X 8" Mastercool by Champion Pad GPAD802
$99.99
CR-1 - 41" x 22.5" x 8" Fits the following models: ADA50, ADA51, ASA50, ASA51 Replaces part #310117-001
GPAD802
Pad Frame for PMI 1425 units 22-1/2 X 46-1/3, 5-2-13A
$189.00
Pad Frame includes: Frame, Aspen pad, and retainer wire. 22-1/2" wide X 46 1/3" tall across outside face of the frame. Pad Frame fits PMI Commercial units D\H1425 D\H1428.
PMI-5-2-13A