Evaporative Cooler Parts

This drain pump automatically replaces the stale, dirty water in the evaporative cooler with fresh, clean water every six hours the cooler is in continuous operation. Mineral deposits, algae and bacteria get washed out, so the water stays purer and the...

Complete set. Comes in 3 pieces. Total size 24t X 36w X 6d May ship in multiple boxes. Aftermarket replacement pads for unit models: PACJS240, PACJS2400, PAC2K163, PAC163SVT, PAC163SHD, PAC16HPVS Replaces OEM pad sets: PAD6024/G, PARKULJ24000,...

Styrofoam spacer for Mastercool cooler pads. Use to take up space between pads and side of water tank. Usually 4 are needed to take up 1" on each side of the pad.

Evaporative cooler v-belt for fractional horsepower applications. 4L-690 Or A-671/2" wide x 5/16" thick.

Mastercool Water Distribution Tube Only Pvc water distribution tube made for Mastercool by Adobeair. Tube, end cap and elbow with barbed fitting.

2-Speed (RSK-2) Wall Switch 6 Position White Plastic Plate (RATED FOR 1/3 - 3/4 HP MOTORS) Includes: Mounting screws and wiring diagram.

For Fractional Horsepower Motors. 4L-570 Or A-551/2" wide x 5/16" thick. Replaces part # P301057A.

Water supply line Scale Eliminator with brass fittings FOR OUTDOOR USE ONLY. DO NOT INSTALL INDOORS...NOT FOR POTABLE WATERCartridge attaches to a 1/4" copper or poly tube water line using 1/4" cc brass fittings. Controls scale buildup and corrosion in...

1/2 " I.D. Vinyl Pump Hose Clear Pump Hose Run Water from the Pump to the Distributor Standard for Residential & Commercial Pumps with 4,500 to 11,000 CFM Ratings

Used on most 1 horse power cooler motors with 5/8" shaft diameter.

MOTOR CLAMPS For Standard 2-1/2" Resilient Motor Mounting Rings for 1/3 HP to 1 HP cooler motors (Set of 2). Replaces Champion #314005-001, PMI 5-7-28

Zinc Blower Motor Pulleys with Keyway Single Belt Groove for Residential Evaporative Coolers