230 volt Cooler Control & Thermostat Retrofit Kit For Mastercool Plus or Contractors Series

For 230 volt application.

This kit can be used to replace the interior control box and thermostat combination on the Mastercool Plus or Mastercool Contractor's Series Cooler, some of which are now obsolete, including #P225101A, P225102A, P218301A, P218601A.
This kit consists of a new control box to be mounted on the outside of the cooler, a new plug receptacle box with wire leads for the inside of the cooler, a new 230 volt motor cord, and a new digital thermostat for inside the house. Requires rewiring of new plug receptacle box to new control box. Disconnect all power before attempting. Read all directions. Level of difficulty:medium.

You can read the control box and thermostat owner's/installation manual here.


Wiring Schematic for 230 volts

SPECIAL NOTE FOR MASTERCOOL CONTRACTOR'S SERIES:
To maintain use of purge pump feature with standard pump, we recommend purchasing also an additional pump receptacle to tie in to the new control box.
230 volt pump receptacle

New cooler control is Dial part #7624. Features include:
Digital Evaporative Cooler Control with Thermostat
2 Speed 1/3 to 1 HP 115V/230V
Automatic start and stop for temperature comfort.
Automatically pad pre-wet.
Automatically adjusts from High to Low speed
Digital display with separate controller in water proof box.
Optional 2 / 4 / 8 hour timer.
Optional dump feature. (Use an extra standard cooler pump for timed water purge, like a Clean Machine.)
Motor rated 1HP @ 115V, 2HP @ 230V
Pump rated 2A @ 115VAC and 1A @ 230VAC
UL listed.