Adobeair ED143 Parts Breakdown List
Manufacturer: Adobeair
Model #: ED143 A-D
Replaced by: PMI D1425
Industry Standard CFM: 14000
Delivered CFM Range: 8500-12000*
Outlet: Downdraft
Cabinet Dimensions: 50”w X 50”d X 53-3/4”h
Outlet Dimension: 26-7/8” X 26-7/8”
Pad Size: 22" x 50"(2 on each side), or 22" x 24" (4 on each side)
Shipping Weight: 400 lbs
Operating Weight: 810 lbs*Range depends on motor & sheave selection and ductwork static pressure.
| Fig. # | Description | Replacement Part # |
|---|---|---|
| 1 | Top Panel | Unavailable |
| 2 | Cabinet Bottom | Unavailable |
| 3 | Corner Leg | Unavailable |
| 4 | Center Leg | Unavailable |
| 5 | Pad Latch Assembly | 47925 |
| 7 | Pad Frame Assembly | 5-2-27A |
| 8 | Pad Retainer Wire (4 per original frame needed | 7972 |
| 9 | Pad Media - Aspen (2 for each side) | AP2250 |
| 10 | Water Distributor Assembly | 5-6-13 |
| 11 | Distributor Metering Tips | 4662 |
| 12 | Motor Base Assembly | 5-3-120 |
| 13 | Bearing Support Bar | Unavailable |
| 14 | Ball Bearing Assembly 1-3/16" | A904601A |
| 15 | Pulley 18" Single Groove A | 5-3-62 |
| 16 | Shaft 1-3/16" x 33.25" | 5-3-5 |
| 17 | Blower Wheel 24x24x1-3/16 | 5-3-56 |
| 18 (Not shown) | Water Pump - 120 Volt | 1023 |
| 19 (Not shown) | Water Pump - 240 Volt | 1024 |
| 20 (Not shown) | Float Valve | 4164 |
| 21a (Not shown) | Motor – ¾ HP 115/230 1PH, 5/8" Shaft 56FR | M161 |
| 21b (Not shown) | Motor - 1 HP 115/230 1PH, 5/8" Shaft 56FR | M165 |
| 21c (Not shown) | Motor – 1 HP 208-230/460 3PH, 7/8" Shaft 56FR | M166C |
| 21d (Not shown) | Motor - 1.5 HP 115/230 1PH, 7/8" Shaft 145T | M169A |
| 21e (Not shown) | Motor - 1.5 HP 208-230/460 3PH, 7/8" Shaft 145T | M170C |
| 21f (Not shown) | Motor - 2 HP 208-230/460 3PH, 7/8" Shaft 145T | M173C |
| 21g (Not shown) | Motor - 3 HP 208-230/460 3PH, 1-1/8" Shaft 182T | M176C |
| 22a (Not shown) | Motor Sheave – 4" X 5/8" Single Groove | 6198 |
| 22b (Not shown) | Motor Sheave - 4.75" X 7/8" Single Groove | S4 |
| 22c (Not shown) | Motor Sheave - 4.75" X 7/8" Double Groove | S8B |
| 22d (Not shown) | Motor Sheave - 4.75" X 1-1/8" Double Groove | S8 |
| 22e (Not shown) | Motor Sheave - 6" X 1-1/8" Double Groove | S9 |
: